Sea & Sea Canon EOS R5 Underwater Housing MDX-R5

Revised ergonomic design, improved safety features, and eye-catching exterior. The new MDX series housings are now upgraded with more standard features to ensure better handling and greater protection for your camera.
 

For better noticeability, controls are partially colored yellow.

All major controls for camera function can be easily operated without releasing your grip on the handle, providing stability and assurance during all imaging situations

Compatible with the Sea&Sea, “Manual Flash Trigger” (optional). and Sea&Sea Optical TTL Converter.
 

Leak Alarm Unit as standard equipment

The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for the early detection of underwater flooding accidents but also for the protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included.

24mm bulkhead allows connection of 3rd party HDMI 2 cable for attaching an external video monitor
 

Other Features

• The Port lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
• The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
• Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger-diameter lenses.
• All controls have luminescence stickers that glow in a dark environment for better visibility of controls.
• Equipped with Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x, and Optical Viewfinder 0.66x,0.8x can be used. *Some vignetting may occur when the VF180 1.2x is mounted on the housing, the upper part of the camera's viewfinder cannot be viewed due to vignetting.
• Sync Cord 2-pin Connector enables the use of conventional hardwired Sync cable(Manual mode only).
• Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
• Built-in leak sensor immediately alerts you to water ingress.
• Tripod screw mount is located on the center underside of the housing.
• Equipped with an under guard to protect housing from scratches and abrasion

 

Specifications

• Dimensions: (W x H x D) 345 x 173 x 164 mm 13.5 x 6.8 x 6.4 Inches
• Weight: 2900 gm / 102.3 Oz (Including Grips).
• Depth Rating: 100m / 330ft
• Construction: Corrosion resistant aluminum alloy (machined. Anodized finish)