Mirrorless / Housings / Sony a7 V

Isotta Sony a7 V Underwater Housing

  • Isotta B120 Port System
  • Use Sea & Sea or Isotta Ports
  • M24 & M16 Accessory Bulkheads
  • Vacuum Ready
  • Depth Rating: 100m/330ft

SKU: # is-4798

FREE Standard Shipping to USA / Canada!

Price $3,667.24
Back

Custom Options

Add an LED Flash Trigger

To trigger strobes, you will need to add one of the flash-triggering options below.

Add a Vacuum System

Check that your system is watertight before you even get it wet!

Add an Expanded Viewfinder

Add 1-inch Ball Adapters

Add a Sare O-ring Set

Price as Configured


Overview / Product Description

Isotta Sony a7 V Underwater Housing



The Isotta Sony a7 V Underwater Housing is a durable, red-anodized aluminum enclosure designed for deep-water photography up to 330ft / 100 meters. It features ergonomic controls with full camera command access, double O-ring seals, a moisture sensor, and a removable B120 bayonet port for secure underwater operation. The housing includes adjustable handles, a standard ISOTTA viewfinder, fiber optic flash connections, replacement O-rings, and a detachable back for easy camera installation. It also supports a wide range of optional accessories, including vacuum systems, external viewfinders, monitor mounts, and strobe brackets, for advanced underwater setups.

SPECS:

COMMANDS

  • ON/OFF lever of the Sony Alpha 7 V
  • Ergonomic camera focusing and shutter lever, easy to use with gloves
  • Lens release lever
  • Front dial
  • C1 button
  • C2 button
  • C3 button
  • C4/Delete button
  • Mode dial
  • Still/Movie/S&Q dial
  • Zoom dial
  • Port safety lever
  • Movie (REC) lever
  • AF-ON lever
  • Rear dial L
  • Rear dial R
  • Lock button rear dial R
  • Menu button
  • AEL button
  • Multi-selector buttons
  • Playback button
  • Control wheel
  • Fn button

WHAT IS INCLUDED

  • Housing
  • Front lid
  • Handles
  • Standard ISOTTA viewfinder
  • Humidity sensor
  • Fiber optic connection bulkhead (to use the flash, needs an optional trigger)
  • Replacement O-ring kit
  • Silicone lubricant 15gr / 0,5 oz
  • Warranty: 2 years manufacturer's (excluding batteries)

TECHNICAL DATA

  • Red color anodized aluminum body
  • Ergonomic side handles, adjustable (via optional accessory)
  • Two fiber optic connections are standard (to use the flash, an optional trigger is needed)
  • Three M16 holes and one M24 for using accessories such as vacuum systems, monitors, Nikonos, or S6 bulkhead
  • Back housing is completely detachable from the front housing
  • Tray with a lock for the easy insertion of the camera
  • Single-hand closing knob for the back of the housing
  • Aluminum buttons and dials with engraved symbols identical to camera controls
  • Wide back display viewfinder glass
  • Standard ISOTTA viewfinder
  • Double O-Ring seals on all buttons and removable parts
  • Moisture sensor with LED indicator (replaceable battery)
  • Removable port B120 bayonet
  • Safety lock on the porthole to prevent accidental opening
  • Wide, rubber-covered feet for solid footing on boat floors or sea floor
  • M8 hole located on the upper side of the housing for various accessories such as focus lights
  • Two M6 holes are located on the housing's bottom side for different accessories, such as brackets for strobes or tripods
  • Prepared for ISOTTA vacuum system (not included)
  • External viewfinders can be mounted, ISOTTA and INON X-2 compatible
  • Working depth: 100 meters / 330 feet
  • Sizes (LxHxP): 282mm x 186mm x 127mm / 11.1in x 7.3in x 5.0in

SPARE PARTS

  • 3062 - Set O.R. for Sony Alpha 7 IV and for Sony Alpha 7 V housings
  • 1895 - Housing front lid B120
  • 1905 - M16X1 cap
  • 3352 - M24x1 cap

OPTIONAL

  • Hotshoe for Sony Alpha housings
  • N5 bulkhead
  • S6 bulkhead
  • Vacuum system ISOTTA
  • Handle extension
  • ISOTTA right or angled viewfinder
  • Upper tray MEDIUM