UW Technics TTL Converter Flash Trigger for Olympus O-MD Cameras in Nauticam Housings
The best of both worlds! Strobes that support optical TTL accurately can be connected via flood-free fiber optic cables and triggered by the UW Technics TTL Converter's onboard LEDs.
- Continuous shooting in both TTL and manual mode, up to the capacity of the external flash for continuous shooting
- Faster shooting response eliminates internal flash recycle lag
- Increased camera battery life
- Less heat inside the housing, and lower risk of fogging
- NO BATTERIES REQUIRED
COMPATIBLE STROBES:
At this time we have confirmed compatibility with these underwater strobes.
- Inon D2000
- Inon S2000
- Inon Z240
- Inon Z330
- Sea & Sea YS-250
- Sea & Sea YS-D1
- Sea & Sea YS-D2
- Ikelite DS160
- Ikelite DS161
COMPATIBLE CAMERAS:
OLYMPUS mirrorless cameras supplied with new style Hotshoe (production 2015-2019)
COMPATIBLE UNDERWATER HOUSINGS:
- NA-EM1-II
- NA-EM5-II
- NA-EM10-II
- NA-EM10-III
- Please contact us for other compatibility
COMBINED CIRCUIT
The combined circuit, consisting of Optical TTL and Electrical TTL system is on a single board with both triggering methods available both separately or simultaneously.
TTL ACCURACY
When shooting with this board, the photographer can relax and totally rely on automatic strobe exposure control. The newest firmware contains an accurate TTL curve for each strobe type. Strobe type can be easily set by onboard 10-position rotary switch. Automatic flash control works very well even in extremely difficult shooting conditions.
NO ONBOARD BATTERY REQUIRED
TTL Converter does not need an onboard battery or mechanical On/Off switch. The product has micro-current consumption from camera HotShoe pin. It activates automatically when the user switches On the camera. It will also switch Off automatically by camera command.
EASY USER INSTALLATION
Installation is very easy for users and takes around 1 min. Full instructions are supplied with the circuit.
COMPATIBLE BULKHEADS FOR ELECTRICAL SYNC:
- UW Technics 4 Pin M14 Nikonos bulkhead
- UW Technics 4 Pin M14 Ikelite bulkhead
SPECIFICATIONS:
- Compatible cameras: OLYMPUS mirrorless cameras supplied with new style Hotshoe (production 2015-2019)
- Compatible underwater housings : Nauticam NA-EM1-II, NA-EM5-II, NA-EM10-II, NA-EM10-III
- Compatible strobes:
- Inon Z330 / Z240 / D2000
- Sea&Sea YS-D2 / YS-D1/ YS-250
- Ikelite DS-161 / DS-160
- Subtronic Pro-270 / Pro-160
- Onboard TTL outputs: 2 optical + 1 electric
- Dual cables support at electric TTL output: yes
- (+/-) “Flash Exposure compensation” adjustment support: yes
- Continuous (serial) shooting mode support: yes
- 1st / 2nd curtain sync support: yes
- Switching “TTL/M” modes underwater by camera controls: yes
- Setting strobe power manually by camera controls (in M mode): 1/64….1/1
- Switching power “On/Off”: automatic, by camera command
- Power source: micro current consumption from camera Hot shoe pin
- Recommended Fiber-optic cable type: Nauticam #26616
- Available M14 Electric Bulkhead type (optional accessories): Nikonos-5, S-6, Ikelite style
