TRT Electronics S-TURTLE 2 Manual Trigger with 150 CD Powerful LED Panels for Sony Cameras

A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord.

s-TURTLE 2 MANUAL underwater photo trigger for Sony camera models

This Manual trigger was developed for Sony MILC camera systems. The s-TURTLE 2 MANUAL underwater flash trigger is the perfect choice for the demanding underwater photographer who needs an easy-to-use, affordable, and reliable trigger that works with the most popular underwater strobes

FEATURES:

• 1st or 2nd curtain, HSS mode (Over the selected limit shutter speed the TURTLE switches to HSS mode automatically).
• The Internal charging system works via a USB AB connector.
• Battery checking and LED power set via USB
• Durable metal hotshoe

Why did TRT TTL develop the HSS switching limit set up in the s-TURTLE 2 manual trigger?

Because different cameras have different flash synchronization.

For example, some cameras have 1/160 max normal flash sync and the camera limits the shutter speed at this point. But in some case, the limit is 1/250 and TRT TTL gives you the possibility to set this point in the TURTLE where the system switches to HSS automatically and you can use the strobes (Backscatter or MF-2 for example) in HSS mode and enjoy these function.

Why do you have to set the LED level?

If you would like to adjust the energy consumption of TURTLE and the power of LED just set the perfect level of the lighting and enjoy the long dive.

If you use multicore cable TRT TTL suggests the 1/128 or 1/64 power but if you have single-core cable please setup FULL or 1/2 level.

Compatible camera models are the Sony Mirrorless cameras.

The s-TURTLE 2 MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam, and Saltedline models).

The package contains:

• s-TURTLE 2 MANUAL trigger for Sony cameras
• 150 cd LED panel (flat, nauticam 5mm) or the special cable for sync cord connection.
• USB Charging cable.

If you want to connect your strobe via fiber optic cable TRT TTL recommends using multicore cable!

The setup software for PC is downloadable from TRT's website: you can find it here.

The Mac version will be available soon in APPstore.