Sea & Sea Optical YS Converter / S2 for MDX-aU Housing

Sea & Sea Optical YS Converter / S2 for MDX-aU Housing

Compatible with SEA&SEA “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light control. 

 

Specifications

• [Controls] Power ON/Power OFF/TTL mode (indicated by the blue lamp)/Manual mode (indicated by the green lamp) - Remaining battery level is indicated by a flashing LED lamp.
• [Auto Power Off] The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour. - The converter can be re-activated by pressing the mode switch.
• [Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
• [Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours (*2)
• *1 Operating time depends on the battery brand, temperature, and frequency of use.
• *2 Operating time tested on 750 mAh batteries.