OPEN BOX DISPLAY - RGBlue System01 V1 Underwater Video Light

AOI RGBlue System01 Underwater Video Light

Single-source type, high-quality COB (Chip On Board) LED

The RGBlue System01 employs a single-source type, COB (Chip On Board) LED. The COB LED emits light from a single plane so that the problems previously seen with multi-LED type light source such as the multi-shadow effect(*1) and light distribution irregularity are solved.

Natural reproduction of underwater colors thanks to high color rendition and optimum color temperature

The COB LED emits light optimized for underwater shooting, achieving a high color rendering index of Ra80(*2) and a color temperature of 5000K(*3), enabling it to reproduce natural-looking colors closely resembling those produced under normal sunlight.

Flat light distribution with 100° emission angle, 2200 lm maximum light intensity, condenser lens provided

Flat light is distributed evenly throughout the emission angle of 100°, which is sufficient for shooting movies, as well as for wide-angle shooting. Maximum light intensity is more than enough with total flux as high as 2200 lm. A condensing lens is provided as standard to increase illuminance by reducing the light distribution angle to 60°.

Modularized system with one-touch connection/disconnection capability

System01 consists of two modules  the light source (Light Module) and the power supply (Battery Module). An original bayonet mechanism allows the two modules to be connected and disconnected with a simple operation. This design increases flexibility, allowing the system to easily adapt different usage requirements, such as preparation of multiple spare batteries.

Complete waterproofing eliminates worries about water leakage

Both modules are completely waterproof, ensuring that water cannot penetrate and cause damage. Each module is provided with an IPX6(*4) equivalent waterproofing mechanism that can stand up to a water depth of up to 100 meters during lighting (i.e. when the modules are connected).

Simple operation, perfect safety mechanisms

Just two pushbuttons are all that's needed to control the switch ON/OFF, 4-step brightness control (500 lm/900 lm/1300 lm/1800 lm) and non-step brightness control (300lm to 2200 lm). Remaining battery power is indicated with an LED indicator. Safety mechanisms include a temperature sensor, overcharge, over-discharge, over-current and short-circuit protection circuitry, as well as an over-pressure valve.

Product Specifications

Light source	LED
Irradiation angle	100° (60° when a condensing lens is used)
Color temperature	Approx. 5,000K
Color rendering index	Ra80
Total flux	· LED: 2400 lm · Product output: Max. 1800 lm with 4-step brightness control. · Max. 2200 lm with non-step brightness control.
Operating environment	Underwater.  If illuminated continuously over land, the product temperature increases so the safety circuitry dims or extinguishes the light.
Brightness control	4-step: 500 lm, 900 lm, 1300 lm, 1800lm Non-step: 300lm to 2200 lm
LED indication	Remaining battery power: Blue  Purple  Yellow  Red Error: Red flashing
Continuous lighting period	4-step brightness control: 500 lm/300 min., 900 lm/120 min., 1300 lm/80 min., 1800 lm/50 min.
Charge method	AC adapter + Dedicated plug
Power supply	Rechargeable lithium ion battery, 3100 mAh/7.4 V(23Wh)
Recharging count	Approx. 500 times
Withstanding water depth	100 meters, IPX8 (JIS protection class 8)
Dimensions	Max. dia. 64.2 mm x 123.5 mm (excluding projections)
Weight	420 g overland, 170 g underwater
Operating temperatures	5ºC to +45ºC (23ºF to 113ºF)
Storage temperatures	5ºC to +45ºC (23ºF to 113ºF)
Storage humidity	20% to 60%
Materials, treatment	Corrosion-resistant aluminum alloy/hard anodized aluminum, PC, optical glass/chemically-strengthened glass.
IR receiver	Brightness control from remote control  When the optional remote control unit is used
Safety standards	CE, FCC, PSE
Light ring thread diameter	M49, JIS standard compliant
Bottom plate/head	Tripod screw compatible, JIS standard compliant