UW Technics NN-2/IS TTL Converter for Nauticam Housings with Nikon DSLR Cameras
The UW Technics NN-2/IS supports both optical and electrical strobe triggering and is compatible with popular strobes from Inon and Sea & Sea. With these flashes, optical strobe triggering is the way to go. The fully automatic and manual functionality of the system is supported, and optical triggering eliminates problematic electrical sync cables.
Most of these supported Nikon cameras have a pop-up flash, and when used with these compatible strobes already offer automatic flash control. So why buy a TTL converter?
In these cases the main advantage of the flash trigger is speed. The recycle time of the camera's pop up flash is no longer a limitation, meaning continuous shooting and rapid fire sequences are now possible! Previously, continuous firing was only available with a manual triggering system, but UW Technics unlocks this capability with optically synced flashes in TTL exposure mode!
TTL is undoubtedly an important feature, but there is no disadvantage with this part installed in manual flash modes when you want them. This one product can serve as both a TTL Trigger (with optical or electrical sync) AND a manual flash trigger.
Simple, User Installable Design
Incredible Battery Life
Based on current draw, the TTL converter is expected to get up to 75,000 flashes on a set of CR2032 batteries.
Field Tested, NUSA Approved
This part has been exhaustively field tested, proving both reliability, and accuracy of the TTL system. The last thing anybody wants to do is ship a product that is going to create a pile of service orders, and we are have been continually impressed by the design and build quality of this TTL converter.
UW-Technics TTL Advantages:
Continuous Shooting (in both TTL and Manual Modes, up to the capacity of the external flash for continuous shooting)
Faster Shooting response - Eliminates internal flash recycle lag
Increased Camera Battery Life
Less Heat, and Lower Risk of Fogging
Increased Reliability Over Traditional Electrical Sync TTL Options
Compatible Strobes:
Inon D200
Inon Z330
Inon D2000
Inon S2000
Inon Z240
Sea & Sea YS-D1
Sea & Sea YS-D2
Sea & Sea YS-D3
Sea & Sea YS-250
Retra Pro
Retra Prime
Retra Original
Subtronic Pro 270
Subtronic Pro 150
Full Specifications:
Compatible cameras: All Nikon DSLR cameras
Compatible underwater housings: Nauticam Housings for
Nikon D600,
Nikon D610,
Nikon D750,
Nikon D7100,
Nikon D7200,
Nikon D800,
Nikon D800E,
Nikon D810,
Nikon D4,
Nikon D4s
NOT Compatible with Nikon D5 or Nikon D500
Compatible underwater strobes:
Inon D200
Inon Z330
Inon D2000
Inon S2000
Inon Z240
Sea&Sea YS-D1
Sea&Sea YS-D2
Sea&Sea YS-D3
Sea&Sea YS-250
Retra Pro
Retra Prime
Subtronic Pro 270
Subtronic Pro 150
TTL outputs: 2 optical LEDs, 2 electric wire connectors (used with Nikonos Connector PN uwt.nf.5.m14)
Maximum Fiber-optic cable length for TTL operation: 3m
Maximum Fiber-optic cable length for MANUAL operation: 35m
Camera pop-up flash operation: Also available (always have a back up)
ISO camera range: 50-25,600
Serial shooting: Available
Switching ON/OFF: Automatic by camera command
Battery type: CR2032 (2pcs.)
Battery capacity (+20_C): 5-7 years, or 75,000 flashes.
Operation temperature: -30_C to +40_C.
Dimensions of main board: 63mm x 50mm x 13mm.
Weight: 25g (excl. batteries).
Support for other strobes and housings coming soon! NN-2/IS has discharge curves dialed in for these compatible strobes, but other popular flashes such as Sea & Sea YS-250 and Ikelite DS-160 are profiled now, and will be supported by future converter releases.
