Ikelite DL2 DS Link Sony TTL Converter Ikelite ST3 Hotshoe Kit

Ikelite pioneered underwater TTL flash exposure for Sony mirrorless cameras, and this is the next iteration of Ikelite's world-renowned Sony TTL flash circuitry. This is compatible with housings shipped from Ikelite on or after January 1, 2025 (serial number 81200 and above). If replacing the hotshoe on an older housing we recommend upgrading to the newer style bulkhead & hotshoe.

Key Advantages

• Faster, more accurate, and more reliable than fiber optic TTL triggers
• Always ready when you are - no batteries required
• Switch between TTL and manual exposure with the press of a button
• Supports flash exposure (EV) compensation set in the camera
• Supports rear curtain sync
• Improves strobe battery life and recycle time
• One TTL converter supports a wide selection of camera models
• Independently waterproof sealed

About Sony TTL

TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash, so you don't have to.

TTL exposure is faster and usually more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.

Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to expose the background properly and let the DL2 adjust your strobe intensity for proper foreground exposure.

Ikelite was the first company to introduce TTL for underwater strobes with Sony DSLR and mirrorless digital cameras and continues to set the standard for the accuracy of Sony TTL flash protocol.

Electric Flash Triggering

Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and fewer missed flashes than fiber optic triggering. The use of electrical TTL also dramatically increases strobe battery life.

The included ST3 Sony TTL Hotshoe and B1A Bulkhead are necessary for TTL operation with most Ikelite DLM housings.

The Ultimate Flexibility

Switch between TTL and manual flash exposure modes with a simple button push. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL2 DS Link fully supports rear curtain sync flash modes. The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.

In The Box

• DS Link TTL Converter
• ST3 TTL Hotshoe
• Lubricant 1cc tube