Fantasea Moisture Detector

Fantasea Dual Fiber Optic Cable B2

The Fantasea Moisture Detector can be installed inside any housing featuring sufficient space for the alarm unit.

The Fantasea Moisture Detector is very sensitive, so whenever moisture is detected by the sensor, the moisture detector LED light begins flashing and a warning alarm starts beeping, thereby alerting the user of a possible leak.

The Fantasea Moisture Detector includes an alarm unit and a moisture sensor unit, connected by a thin wire.

The alarm unit is installed on any of the housing side panels using a double-sided installation sticker, included in the package. Make sure that your housing offers sufficient space for the alarm unit to be installed (34 x 24 x 7 mm) without interfering with a proper watertight seal.

The Moisture Sensor unit is installed just under the camera or camera tray inside the housing.

Operated by a 3V Lithium #CR1220 battery. A replaceable and non-rechargeable battery is included.



Important Notices

All components should be handled carefully during installation.
The Fantasea Moisture Detector assists with detecting moisture inside the housing. Installation of the Fantasea Moisture Detector inside the housing does not eliminate the user's responsibility of validating housing watertight seal prior to and during the dive.