AOI Q1 RC Ultra Compact Underwater Strobe

SPECS:

• MAIN BODY MATERIAL: Polycarbonate + Glass Fiber
• WATERPROOF LEVEL: 60m / 200ft
• STROBE
• GUIDE NUMBER: G.N.= 22
• COLOR TEMPERATURE: 5,600K (5,000K with Diffusor)
• BEAM ANGLES: With Diffusor Horizontal- 85°, Vertical- 85°
• FLASH RECHARGE TIME: 0.85 Second (Full Power)
• NUMBER OF FLASHES: 1,500 times (Using Flash Only, Full Power and with 3,100mAh Li-Ion Batteries)
• FLASH SYNC.: By Fiber Optical Cable (Multi-cores Fiber Optical Cable is Recommended)
• PRE-FLASHES SYNC.: Auto Learning
• FLASH MODES:
• RC MODE: OMDS / RC FLASH (Group A, Channel 1), TTL AUTO, MANUAL, FP TTL, FP MANUAL
• I-MACRO MODE: TTL AUTO, MANUAL, Snooting (Group A, Channel 1)
• MANUAL MODE 6 Steps Setting: 1/64, 1/24, 1/8, 1/4, 1/2 & 1/1
• MODELLING FLASH: 2 Seconds Flashing Duration / Press
• FLASH TEST BUTTON: Yes
• LED LIGHTS
• MAXIMUM OUTPUT: 700 Lumens
• POWER CONTROL: 25%, 50%, 100% and OFF
• COLOR TEMP.: 5600K
• BEAM ANGLE: 45°
• BURN TIME: 130 Minutes (Using LED Only, Full Power and with 3,100mAh Li-Ion Batteries.)
• BATTERY REQUIREMENTS: 18650 Li-Ion Rechargeable Battery x2pcs (Battery is not included with the product)
• OUTPUT CURRENT: Minimum 5A
• BATTERY LENGTH: Minimum 68.5mm
• STROBE MOUNTING: 1" Ball Mount Only (Non-replaceable)
• DIMENSIONS: 125mm (L) x 77mm (W) x 131mm (H)
• WEIGHT: ON LAND: Approx. 550g (Batteries included) UNDERWATER: Approx. 90g (Batteries included)
• STANDARD ACCESSORIES:
• Strobe Diffusor for Q1 Series SD-01
• Control Knob Extension for Q1 Series CKE-01
• Spare O-ring set for Q1 Series SOR-01
• O-ring Remover ORR-01
• Silicone Grease (5g) SIGR-5
• Battery Storage Case BSC-18650-2 (Rechargeable Battery is not included)