Orcalight Seawolf SSL 200 meter Shore Supply Land Umbilical

Orcalight Seawolf SSL 200 meter Shore Supply Land Umbilical - Not for Underwater Use

The Next Generation SSU Add-On
This SSL is supplied with a 200m Length of cable and pre assembled end plate with its on board circuitry and switch ready to connect directly to a 2260 lamp head, a 1560 or lamp heads on their own

The SSL allows you to take your dive light head and use it in free air for any purpose.

Please note that due to the reduced cooling the SSL runs a nominal 11000 lumens

The switch plate is supplied however with the standard 3 setting switch allowing you to temporarily increase power when needed, the lamp will revert back to a lower setting after an unspecified amount of time subject to enviromental conditions.

All lamp heads are safe to use with the SSL

Swapping takes about 2 minutes via two screws and can be done in the field

Voltage for the 200m SSL can be with 12Vdc to 48Vdc

Whats In The Kit

• 1 x 10m SSL cable and backplate assembly