AOI RGBlue System 01 V2 Light Package
The RGBlue System01 employs a single-source type, COB (Chip On Board) LED. The COB LED emits light from a single plane so that the problems previously seen with multi-LED type light source such as the multi-shadow effect and light distribution irregularity are solved.
Base Price $
Price as Configured $
Overview / Product Description
AOI RGBlue System01 Underwater Video Light
Single-source type, high-quality COB (Chip On Board) LEDThe RGBlue System01 employs a single-source type, COB (Chip On Board) LED. The COB LED emits light from a single plane so that the problems previously seen with multi-LED type light source such as the multi-shadow effect(*1) and light distribution irregularity are solved.
Natural reproduction of underwater colors thanks to high color rendition and optimum color temperatureThe COB LED emits light optimized for underwater shooting, achieving a high color rendering index of Ra80(*2) and a color temperature of 5000K(*3), enabling it to reproduce natural-looking colors closely resembling those produced under normal sunlight.
Flat light distribution with 100° emission angle, 2200 lm maximum light intensity, condenser lens providedFlat light is distributed evenly throughout the emission angle of 100°, which is sufficient for shooting movies, as well as for wide-angle shooting. Maximum light intensity is more than enough with total flux as high as 2200 lm. A condensing lens is provided as standard to increase illuminance by reducing the light distribution angle to 60°.
Modularized system with one-touch connection/disconnection capabilitySystem01 consists of two modules � the light source (Light Module) and the power supply (Battery Module). An original bayonet mechanism allows the two modules to be connected and disconnected with a simple operation. This design increases flexibility, allowing the system to easily adapt different usage requirements, such as preparation of multiple spare batteries.
Complete waterproofing eliminates worries about water leakageBoth modules are completely waterproof, ensuring that water cannot penetrate and cause damage. Each module is provided with an IPX6(*4) equivalent waterproofing mechanism that can stand up to a water depth of up to 100 meters during lighting (i.e. when the modules are connected).
Simple operation, perfect safety mechanismsJust two pushbuttons are all that's needed to control the switch ON/OFF, 4-step brightness control (500 lm/900 lm/1300 lm/1800 lm) and non-step brightness control (300lm to 2200 lm). Remaining battery power is indicated with an LED indicator. Safety mechanisms include a temperature sensor, overcharge, over-discharge, over-current and short-circuit protection circuitry, as well as an over-pressure valve.
|Irradiation angle||100° (60° when a condensing lens is used)|
|Color temperature||Approx. 5,000K|
|Color rendering index||Ra80|
|Total flux||· LED: 2400 lm|
· Product output: Max. 1800 lm with 4-step brightness control.
· Max. 2200 lm with non-step brightness control.
|Operating environment||Underwater. � If illuminated continuously over land, the product temperature increases so the safety circuitry dims or extinguishes the light.|
4-step: 500 lm, 900 lm, 1300 lm, 1800lmNon-step: 300lm to 2200 lm
Remaining battery power: Blue � Purple � Yellow � RedError: Red flashing
|Continuous lighting period||4-step brightness control: 500 lm/300 min., 900 lm/120 min., 1300 lm/80 min., 1800 lm/50 min.|
|Charge method||AC adapter + Dedicated plug|
|Power supply||Rechargeable lithium ion battery, 3100 mAh/7.4 V(23Wh)|
|Recharging count||Approx. 500 times|
|Withstanding water depth||100 meters, IPX8 (JIS protection class 8)|
|Dimensions||Max. dia. �64.2 mm x 123.5 mm (excluding projections)|
|Weight||420 g overland, 170 g underwater|
|Operating temperatures||�5ºC to +45ºC (23ºF to 113ºF)|
|Storage temperatures||�5ºC to +45ºC (23ºF to 113ºF)|
|Storage humidity||20% to 60%|
|Materials, treatment||Corrosion-resistant aluminum alloy/hard anodized aluminum, PC, optical glass/chemically-strengthened glass.|
Brightness control from remote control� When the optional remote control unit is used
|Safety standards||CE, FCC, PSE|
|Light ring thread diameter||M49, JIS standard compliant|
|Bottom plate/head||Tripod screw compatible, JIS standard compliant|
AC Adapter & Recharge Plug Set
- For use in recharging the Battery Module. Three plugs including A-/C-/BF-type designs with 100 to 240 V compatibility are provided.
And dedicated plug used between Battery Module & AC Adapter.
- Attaches to the front end of the Light Module. It irradiates the target more brightly by narrowing the emission angle to 60° (from 100° when it is not used).
YS Adapter set
- Adapter for mounting the light source on an arm. Can be attached to the accessory mounting plate. * With an Allen wrench
Rotary Shoe Adapter