|
Zoom images
Aquatech SS-Zoom Sport Shield for Nikon & Canon lenses
The Aquatech Sport Shields are designed to protect professional Cameras and Lenses from adverse weather conditions such as wind, rain, salt air and sand. They are designed to accommodate and protect most SLR film and Digital Cameras.
The AT-SS-ZOOM Sport Shield is Length 5 inches (130mm) X Diameter 5 inches (130mm) and will work with these lenses:
CANON:
10-22mm f3.5-4.5
16-35mm f2.8 L II
17-35mm f2.8 L
17-40mm f2.8L
14mm f2.8 L II
24mm f1.4 L
35mm f1.4 L
50mm f1.2 L II
85mm f1.2 L II
NIKON:
12-24mm f4 AF-S
14-24mm f2.8 AF-SI
17-35mm f2.8 AF-S
17-55mm f2.8 AF-S II
24-85mm f2.8-4 AF-S
24-70mm f2.8 AF-S II
28-70mm f2.8 AF-S
35-70mm f2.8 AF
Sport Shield Rain covers are manufactured using a Versatile, High Performance and Multi Layer Barrier Fabric System. This design seals the fabric with a series of coatings or ëlayersí that prevent driving rain, water, snow or dust from entering the fabric.
The Multi Layer Barrier Fabric System ësandwichesí the textile. The outside face is treated with a TEFLONÆ water repellant finish preventing surface absorption of water, dirt, dust and oil. The inside surface is coated with THREE successive layers of a specially engineered formula which combine to create a tough, durable and permanent waterproof system.
Independent textile testing indicates an exceptionally high hydrostatic head averaging 10,000+mm (160kpa). It requires more than 10 meters of vertical water pressure directly on this fabric before any penetration could occur. The special coating will stay waterproof for the life of the garment.
Tests conducted show an average breathability of 8,000 grams of water vapor per square meter of fabric per day. For comparison, leading waterproof fabrics rate between 3,000 and 5,000 grams per square meter per day.
- Made of high quality 3-ply waterproof, breathable fabric
- Fully Tape Seam Sealed
- Waterproof Silicone Sealing around view windows
- YKK Zippers (weatherproof) for ease of application and removal
- Presents a watertight seal around Lens Front
- One piece design provides complete enclosure and moisture protection for both the Camera body and lens with
a ìglove fitî
- Designed with a waterproof ìsleeveî to safely and easily access and operate Camera Controls
- Custom Eyepiece Fastener
- Draw Strings on Hand Access and Tripod Sleeve for protection when not in use
- Waterproof view windows to monitor camera functions
- Designed to quickly and easily apply and remove
- Eye piece cover flap to protect viewfinder when not in use
- Flash Accessory available for use with the SS-200 / SS-Zoom and SS-300 units
SKU: at-ss-zoom
|
|